Isolution Library

I have only had my Smartfade for a few weeks and havent had a lot of time to get my head around it completely. I recently tried to build a fixture library for iSolution / imove 575s without success. I dont quite get the concept in the fact that the fixture assignes 16 channels. However 1 of these channels has no function. Which bump button do you assign no function to. There is also a Pan and Tilt speed channel. Where do you assign this to. Has anyone come accros a similar problem or is there something I am missing with the whole concept. Even better, is ETC planning to add this range to the next update. Jands tells me to read the manual and follow pages 30 - 33. I hope someone can come up with a better sugestion than Australias Premier ETC dealers can.

Jands suggestion is Ok! Yuo have to read the manual and.....

Don't worry about the channel with no funtction...simply don't patch it.

If you use only some time the P and T speed you can put this channel in the page 2 of parameters (PARAM 2)

for exemple at Ch 1: OFFSET [3] HOME [0] then press the bump 1 of PARAM 2.

In this way you can patch the control channel:

for exemple at Ch 2: OFFSET [16] HOME [0] then press the bump 2 of PARAM 2.

 for the other channels follow the manual!:-)

 

I hope this helps!

 

Ciao

 

Davide Gabani

ETC Console Trainer

 

 

Thanks so much,

I will post the results in a day or so.